Wiring Schematic and Schedule

From-To connector references are specified to form a point-to-point wiring list. Wiring schematics and schedules can then be generated automatically from the information included in the wire list and harness assembly drawing.

These schematic diagrams and schedules show the pin to pin wiring for all the connectors and wires in a harness design. The wiring details can be entered via HarnWare then the output can be drawn in Visio, the user has a choice to show the details as a Wiring Schematic or a Wiring Schedule (tabulated format).

3-Way Switch Wiring Diagram Variation #1

This wiring diagram illustrates the situation where the power comes into the light box first, and then on to switch #1, and switch #1 to switch #2. This requires a 2-wire from the light to the first switch, and a 3-wire between switches.

Daewoo Korando Front and Rear Fog Lamp Schematic and Routing Diagrams

Front and rear fog lamp schematic of Daewoo Korando shown in the following figure. It shows the connection and wiring between each parts and component of front and rear fog lamp system of the vehicle such as alternator, ignition switch, taillamp relay, b/0 switch, rear fog lamp relay, multifunction switch, front fog lamp relay, rear fog switch, cluster, and many others. Herein is the schematic :

Daewoo Korando Back Up and Stop Lamp Schematic and Routing Diagrams

Back up and stop lamp schematic of Daewoo Korando shown in the following figure. It shows the connection and wiring between each parts and component of back up and stop lamp system of the vehicle such as alternator, ignition switch, stop switch, b/o switch, antilock brake system, back up switch, back up lamp, and many others. Here is the schematic :

Daewoo Korando Turn Signal and Hazard Lamp Schematic and Routing Diagrams

Turn signal and hazard lamp schematic of Daewoo Korando shown in the following figure. It shows the connection and wiring between each parts and component of turn signal and hazard lamp system of the vehicle such as  alternator, ignition switch, hazard switch, tail, flasher unit, multifunction switch, and many others. Here is the schematic :

Daewoo Korando Head Lamp Schematic and Routing Diagrams

Head lamp schematic of Daewoo Korando shown in the following figure. It shows the connection and wiring between each parts and component of head lamp system of the vehicle such as  alternator, ignition switch, buy-off switch, high lamp relay, low lamp relay, multi function switch, dimmer, light switch, and many others. Here is the schematic :

1997 Chrysler Town and Country Starting System Component Schematic Diagram

The 1997 Chrysler Town and Country Starting System consists of ignition switch, starter relay, power train control module (PCM) double start override, neutral starting and back up switch with automatic transmission only, wiring harness, battery, starter motor with integral solenoid, positive temperature coefficient (which is the circuit protection for the ignition feed to the starter relay coil. The PTC is located in the Junction Block).
These components form two separate circuits. A high amperage circuit that feeds the starter motor up to 300+ amps, and a control circuit that operates on less than 20 amps. The following schematic diagram shows the interconnection between 1997 Chrysler Town and Country Starting System Component.

2006 Chrysler 300 Instrument Panel Wiring Harness

The following schematic shows the 2006 Chrysler 300 Instrument Panel Wiring Harness (click image to enlarge). It consists of:

1. Instrument Panel Wiring;
2. Radio Wiring;
3. Radio Jumper Wiring;
4. Steering Wheel Wiring;
5. Air Conditioner and Heater Wiring